| We pulled the F.I. unit off my '63 today |
| Fast idle: It's always idled a bit too high |
| Vacuum at fast idle: ~17 |
| Warm idle: ~8,000 |
| Vacuum at warm idle: ~13 |
| Intake coming off |
| 2 F.I. units removed in 2 days! Now, that's a really good weekend! |
| We punched holes in the new A-Arm flaps to exactly match the staple holes of the originals |
| That simplified getting the staples through the wheelwells! |
| It's all in the details... |
| The staples came out clean! |
| We also got the new Speedo cable hooked up |
| And removed the F.I. unit from the Daytona Blue '63 |
| And we mounted the new 'date correct' expansion tank |
| Vaseline trick - coated the rivets/bolts/rubber components prior to paint in engine compartment |
| Just wiped it off after paint. Voila! |
| Remember the damaged clutch fork? I panic'd and ordered one from one of the Corvette Supply houses... |
| And a day later, one shows up on CraigsList. 3 miles from my house! Got it for $35! Original beats Repro any day. |
| Getting closer... |
| Exhaust manifolds sand blasted & dressed! |
| Freshly turned flywheel |
| Rented a Pilot Bearing puller from O'Reilly Auto |
| Attached to a slide hammer |
| Pilot bearing out! Old vs. New - ouch. |
| New Flywheel on |
| Luk Clutch kit installed |
| Curveball: my clutch fork tooth was broken on the clutch fork spring |
| Had to put the motor on hold |
| Looking' good though! |
| Onto the wheelwells - using 3M undercoat product |
| Cleaned up the firewall - ready to tape |
| Taping complete - ready to spray |
| Krylon satin black going on... |
| Engine bay complete! |